ETL IP67 120LEDs High Voltage 277V LED Strip
|FOB Price:||US $0.9-2.9 / Meter|
|Min. Order:||50 Meters|
|Min. Order||FOB Price|
|50 Meters||US $0.9-2.9/ Meter|
|Production Capacity:||100000 Pieces/Month|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: YH-HRF605050220S-W/WW/R/G/B/Y
- Power: 15W/M
- Voltage: 277V
- Trademark: BET
- Specification: 5000x22x11mm
- HS Code: 9405409000
- Certification: LVD, EMC, RoHS, CE, ETL
- Emitting Color: W/Ww/R/G/B/Y
- IP Rating: IP67
- Transport Package: 50m/Roll 2roll/Carton
- Origin: Guangdong Shenzhen
|Material||PVC cover,copper wire|
|Working Temperature||-20~50 ºC|
1.Can be run in 220V or 110V without extra adaptor or power source.
2.Can be max run 50 meter and also be cut or connected in every meter.
3.PVC tube provides good waterproof and can be used both indoor & outdoor.
4.Solid-state for high vibration resistance and good flexibility for any shape.
5.Led Chip:The smd5630 led is more brightness than others, high lumen 50-55lm/led, with 2 years
6.Technology:The led and resistance is vertical mounting, Not easy loose when flex the led strip.
7.Copper wire:19x0.16cm2 with supper conductivity, and Not easy rust.
1.100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test .Its temperature after 24 hours' lighting led.
2.Then after it is cool we again test 100% of the lamps to see if it still work well .Each lamp should pass all these QC procedures before shipping to customer.
We ship goods by UPS/DHL/FEDEX/TNT express which takes 3~ 5 days to arrive, or by air cargo which takes about one week to arrive , or by sea which takes about one month to arrive , depending on your actual requirements.
MOQ:Normally 200 meter
Trade term:EXW / FOB Shenzhen
Delivery time:3-5 working days for sample order, 7-25 working days for mass order
1) High Lumen:120pcs 2835 per meter,bright and uniform lighting effect,
2).50m/roll with power plug,you only need to connect the plug to power can light up the led strip,
Very convenient for use!
3) With very thick insulation thickness,The Distance from the PCB to PVC base is more than 1mm,
It is safe to use.
All the chips BET use good brand chip with 22-24LM/per(2835),3528 7-8 lm,5630 50-55lm per meter, with uniform light and low light decay with high quality and long life span, Two years Guarantee, ETL, CE & ROHS approved.
BET Strips use high transparent plastic material, It can bear high temperature and with strong anti-ultraviolet, While most of the other normal strips only adopt muddy plastic material, this makes strips not so bright and will be easily turn yellow after short time using.
The LED and resistors BET mounted is with vertical mounted, while the others is with horizontal mounted.This will be not so easy to fall off with the mounting when make installing.
BET Adopt pure cooper wire, With super conductivity, Higher brightness and more uniform light.While thecommon one only use the iron wire with low material cost and poor conduction.
The PCB width we adopt is with 8MM,While others is only with 5MM,wider PCB is better for heat dissipation and protect the LEDS.
BET adopt advanced machine and technology for every process, you can see our BET's PCB inside is flat while other's is curly.
Take out the package,make sure it comes with necessary accessories,which should include: Fixing clips,middle plugs,end caps,head wires.Fix the strips with clips onto
Where you need,put the wire into sockets to light the strips.
Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end
With end caps,seal with enough glue to make sure it is still waterproof.
Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of
Two separate strips to connect them into a long strip,after well connected,seal all the plug
With enough glue.
RGB color need to connect a controller.
1.Q:Could you send me your catalogue and price list?
A:As we have more than thousands of products, it is really too hard to send all of
Catalogue and price list for you.Please inform us the style you interested, we can
Offer the pricelist for your reference.
2.Q:How about the quality of your product?
A:100% inspection during production.Our products are certified to CE and Rohs international quality standards.
3.Q:What material of the product can you supply?
A:PCB width, Iron wire, Copper wire, logo, Packing details or according to your requirement.
4.Q:What's the delivery time?
A:1-3 days for sample order,7-15 working days for bulk order after receiving your payment and confirmed every details.
5.Q:What's your packing?
A:Our Normal packing is bulking in Carton, 11.95kgs/carton, 2roll/carton.We also can pack products according to your requirement.
6.Q:What about the payment?
A:Small payment via Paypal,big amount via TT.Also via Western Union and Money Gram.
If any question, please contact me.