120V 230V Waterproof 2835 Strip Light LED Neon Flex 12V
|FOB Price:||US $2.65-3.2 / Meter|
|Min. Order:||50 Meters|
|Min. Order||FOB Price|
|50 Meters||US $2.65-3.2/ Meter|
|Payment Terms:||T/T, Western Union, Paypal, Money Gram|
- Model NO.: YH-HRF602835220S-W/WW/R/G/B/Y
- Power: 6-10W
- Voltage: 100-120V&200-277V
- Warranty: Two Years
- Cuttable Unit: 0.5m/Cut or 1m/Cut
- Trademark: BET
- Specification: 17kg/Carton
- HS Code: 9405409000
- Certification: VDE, LVD, EMC, RoHS, CE
- Emitting Color: W/Ww/G/B/R/Y
- IP Rating: IP67
- Dimension(W*H): 50000X16X9mm
- Sample Order: 1m Available
- Transport Package: 50m/Roll, 2 Rolls/Carton
- Origin: China
|AC110-120V/200V-277V 2835 120led/m single color led neon light|
|Color||cool white,warm white,blue,green,red|
|LED Qty||2835 120led/m|
|Cut length||0.5m or 1m per cut|
|Package||50m/Roll, 2rolls/Carton, 17kg/Carton, 34*34*32CM|
|Application||Bars, Hotel, Resurant, Indoor ceiling decoration, outdoor project lighting, Christmas decoration|
Advantages of our products:
All the chips BET use good brand chip with 22-24LM/per(5050),3528 7-8 lm, 5630 50-55lm per meter, with uniform light and low light decay with high quality and long life span, Two years Guarantee, ETL,CE&ROHS approved.
BET Strips use high transparent plastic material, It can bear high temperature and with strong anti-ultraviolet, While most of the other normal strips only adopt muddy plastic material, this makes strips not so bright and will be easily turn yellow after short time using.
The LED and resistors BET mounted is with vertical mounted, while the others is with horizontal mounted.This will be not so easy to fall off with the mounting when make installing.
BET Adopt pure cooper wire, With super conductivity, Higher brightness and more uniform light.While the common one only use the iron wire with low material cost and poor conduction.
The PCB width we adopt is with 8MM,While others is only with 5MM,wider PCB is better for heat dissipation and protect the LEDS.
BET adopt advanced machine and technology for every process, you can see our BET's PCB inside is flat while other's is curly.
How to install the led neon?
1. Install:Take out the package,make sure it comes with necessary accessories,which should nclude:fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto where you need,put the wire into sockets to light the strips.
2. Cut: Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,seal with enough glue to make sure it is still waterproof.
3. Connect: Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.
1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
1.100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test its temperature after 24 hours' lighting.
2.Then after it is cool we again test 100% of the lamps to see if it still work well . Each lamp should pass all these QC procedures before shipping to customer.
MOQ: Normally 200 meter
Trade term: EXW / FOB Shenzhen
Delivery time: 3-5 working days for sample order, 7-10 working days for mass order
1.for high voltage LED strip:50meter/ roll,two rolls in to a standard export carton;
2.for low voltage LED strip:5meter/roll ,40 rolls in to a carton;
3.we can custom the package as your requirement.